PyroLEDA® - Application

PyroLEDA® Firing System offers specific solutions to every task. From small displays for weddings, to major international events: PyroLEDA® boasts a vast experience of firing at all sorts of locations, for all sorts of occasions. PyroLEDA®: a definitive solution for every need.

  • SQ3 in A-TRG or X-TRG mode

    • Designed for pre-programmed and sequential firings. SQ3 can be programmed in a wide variety of functions: STEPPER, ACC, COS, TRG, PRG (via TP3 or via PC through “SQ3 Programmer” software). They can be activated through a standard electric impulse (min. 9V-10 ms) issued from an external battery or from another firing system.

  • SQ3 in SYNC mode

    • Designed for small pyrotechnic display with music. SQ3’s timings are pre-programmed with the help of a PC, through the “SQ3 Programmer” software. It can be activated with the PLAY function of any audio source. The audio track is generated by “SQ3 TimeCode Generator”.

  • RT3 and SQ3 in MANUAL mode (VIA CABLE)

    • Designed for manual firings. RT3 can control up to 16 x SQ3 (512 cues) without having anything to program. The same configuration is also relevant to F3 Backup.

  • SQ3 and RT3 in MANUAL mode (VIA WIRELESS)

    • Designed for manual firings. It is designed for manual and direct firing and there’s no need for any programming. Each RT3 Master can control up to 16 x RT3 Slave and up to 256 x SQ3 (8.192 cues). The same configuration is also relevant to F3 Backup.

  • F3 (Ver. 1.0) and SQ3 in O-DIG mode (VIA CABLE)

    • Designed for medium-sized digital displays (MAN, SEMI-AUTO, AUTO and SYNC), F3 (Ver. 1.0) can control up to 64 x SQ3 (2048 cues) via cable (min 0,5 Ø). F3 can be programmed by software. Tele-Energy function is also available.

  • F3 (Ver. 1.0) with RT3 in BRIDGE mode and SQ3 in O-DIG mode (VIA WIRELESS)

    • Designed for medium-sized digital displays (MAN, SEMI-AUTO, AUTO and SYNC). Connected with RT3 Master, F3 (Ver. 1.0) can control up to 64 x RT3 Slaves; the RT3 Slaves can control up to 64 x SQ3 (2048 cues). F3 can be programmed by software. Wireless and cable connections can be used simultaneously.

  • F3 (Ver. SuperMaster) with RT3 in Remote mode / SQ3 in O-DIG mode (VIA WIRELESS and/or CABLE)

    • Designed for large-sized digital displays (MAN, AUTO, SYNC, SEMI-AUTO, SUPERCUE, OVERLAP). ADVANCED Functions. Builder function. F3 (Ver. SuperMaster) can control up to 256 x RT3 and 4096 x SQ3 (131.072 cues). F3 can be programmed by software. Wireless and cable connections can be used simultaneously.