Sequencer FSQ will allow you to create scintillating figures to incorporate into your firework displays

• 25 lines in total

• Voltage at 24 V

• Firing intervals from 0.03 to 999 sec

• Connection check-up on all lines

• 6 programmation modes

• Visual and sonic simulation of sequences

• Compatible with any firing system

• “LINE IN” connection with firing system by wire

• “LINE OUT” for other Sequencers in parallel

• “LINE OUT 25” for other Sequencers in cascade

• Dot Matrix Display

• Rechargeable internal battery

• Battery check & recharge indicator LEDs

• Dimensions: 41,5 x 20 x 8 cm

• Two years warranty

         • Compatible with any firing system

         • It can be programmed by PC

         • Utilization as Stand-Alone or as

            “DISCIPLE” of the digital   

            firing system FBC 300

To trigger the Sequencer FSQ 200 you need an electric impulse of minimum 9 Volts to maximum

300 Volts. Just connect it, as an electric igniter, to a battery,

to Pyroleda FRC 200 or to any kind of firing system.

Pages 1 2 FOLLOW>>