Provided in its robust and watertight NANUK® suitcase and characterized by a total weight of only 3 kg, RT3 is a Field Controller aimed at managing the SQ3 Firing Modules. It can operate either independently or integrated into the system together with F3 (both in 1.0 Version and in SuperMaster version). You can connect up to 16 x SQ3 to every RT3 by means of a bipolar cable (max 500m - Ø min. 0.5mm). RT3 can be used in two different ways: as manual and direct wireless controller of the SQ3s and also as an intermediary Field Controller between F3 and SQ3. This powerful device is particularly efficient when used as wireless remote controller, serving as a data transmission node for large or medium-sized displays. You can also connect RT3 Field Controller to other RT3 (using Master/Slave Setting) and to F3 via cable or via wireless, by means of the AT3 Antenna Module, connected through a 3 meters long XLR-4 connector.
MANUAL MODE (MANUAL WIRE – MANUAL RADIO)
Direct control of up to 16x SQ3. Via direct bipolar cable (max 500m - Ø min. 0.5mm). Via radio module: when set to Master, the RT3 (provided with AT3) can control up to 256 x RT3 Slaves (each Slave has an AT3 antenna module).
RADIO MODE - F3 VER. 1.0 (BRIDGE)
A Master RT3 can be connected to an F3 by means of BUS connector. It can control up to 64 x RT3 Slaves provided with AT3 antenna module.
F3 SUPERMASTER MODE (REMOTE WIRE – REMOTE RADIO)
RT3 is the Field Controller. You can connect up to 256 x RT3 to each F3. Via wireless or using XLR-4 connector for connection with F3: F3 provided with AT3 which can connect to RT3s (also provided with AT3).